Twelve months ago I sent a note to Slimer of the Aussie NWN team asking if they needed a part-time developer for their custom content. The Aussie NWN team had plans for a NWN2 persistent world set in Britain around 300AD and it sounded like an interesting project to contribute to. Plus I had played on one of their NWN PWs a couple of years ago and so I knew the guys involved. I had only been modelling for a few months when I contacted Slimer, but I was confident enough to be able to make placeables and other non-animated models for them.
I started with some rustic houses. Many of the original Obsidian models in NWN2 are way too clean and the rural house models are a perfect example. The thatched roofs look like piles of hay and every wall and corner is perfectly square. It was a good opportunity to grunge things up a little and knock a few walls and door frames off square.
While I was playing Bob the dodgy Builder, I noticed that the rural watchtower model (that looked great) was mostly a useless pile of timber that you couldn't climb. Duh! Not much use to a module builder. NWN2 seemed to be devoid of towers and platforms that could be climbed and used to defend a rural town. I took up the challenge of making watchtowers and archers platforms that the players could climb.
And so started my love/hate relationship with the NWN2 walkmesh, for it's no simple thing to climb a ladder in NWN2.
The walkmesh is used to stitch the geometry of a model into the terrain of the surrounding area and it defines where players can and cannot walk. For most placeable models this is easy enough; you have a wall and you don't want players to be able to walk through it. If you add a walkable gradient to a model (such as stairs) the points where the model intersects the terrain usually stitch adequately, but only as long as the terrain and the stairs terminate at the same level. If the stairs are sunk into the terrain the walkmesh creates a dip that makes the ground in front of the stairs unwalkable.
I settled on a walkmesh that worked well with the base of the stairs level with the ground and so in October 2007 I released my very first placeable hak with watchtowers and rural fort wall models on the NWVault site. I have been a little surprised at its lack of popularity and in ten months it has only tallied 280 downloads. In any case, I recently found myself in between projects and I decided to take the opportunity to revisit my watchtower hak.
I never liked the texture that Obsidian used for the fort walls. For a start, the models cannot be tinted. The texture also makes the upright posts in the fort walls look like mutant asparagus cross-bred with giant bamboo. It was time for the BTH texture treatment to add a more weathered look for the timber and an opportunity to include a tint map. The new texture is on the left, original texture on the right.
I also wanted to build an archers platform that was integrated with the style of the fort walls. I am quite pleased with this one, it turned out nicely.
Here is a look at the new Archer's Platform for the Rural Fort Walls. I'm planning for these to be included with v1.20 of the
BTH Watchtowers hak for NWN2. The shot on the left shows the model as I intended it to be used. The shot on the right demonstrates the improved height postioning by utilising the walkmesh helper on a model that has been sunk into the ground. Used like this, on the right, I think it makes a great improvised defensive position.
